configuration video tutorials
The video shows how to configure additional heater ECU (Webasto) using BimCOM. The same procedure applies to other control units as well. For BimCOM configuration capabilities please see BimCOM diagnostics coverage ("Coding/Configuration").
Video shows re-configuration of an ECU using AS-BUILT data.
This video shows how to change instrument panel cluster (IPC) display from kilometers to miles on Ford Fiesta 2012. The procedure involves reconfiguring CCF configuration data in IPC ECU.
FCOM allows you to easily configure Cruise Control System (CCS) on many models. Once CCS is installed in vehicle, connect to BCM and simply reconfigure CCS option as shown in this video tutorial. This procedure applies to the following Ford models: Mondeo 2006-2014, Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit 2006-, Transit Connect 2013-, Transit Custom 2013-
FCOM is capable of daytime running lights (DRL) reconfiguration. Ford vehicles support multiple national standards how DRL behave. With FCOM you're free to choose DRL behaviour you desire (please consult local road law first!) This procedure applies to the following Ford models: Mondeo 2006-2014, Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit 2006-, Transit Connect 2013
FCOM supports configuration function to perform trailer module installation. You can easily configure trailer type in BCM configuration after the trailer module is installed. This procedure applies to the following Ford models: Mondeo 2006-2014, Galaxy 2006-, S-Max 2006-, Focus 2010-, Kuga 2010-, C-Max 2010-, Transit Connect 2013-, Transit Custom 2013-
This video shows how to add external temperature sensor to a car. First we read fault codes to show no DTCs are present. Then external temperature sensor is configured. When configuration is saved, body computer displays DTC showing sensor error (as the sensor is not yet connected).
This video shows step-by-step guide how to enable day-time running lamp menu on Fiat Punto Evo 2009. This involves configuring body module and transferring configuration data to instrument panel.
Tutorial how to add or remove ECUs from vehicle proxi configuration in body computer. The procedure allows retrofitting ECUs or removing ECUs that are no longer necessary (e.g. when changing electric power steering to mechanical).
Video shows how to change CAN-BUS idle time in CAN gateway on Porsche 911.
Tutorial how to add or remove ECUs from vehicle ECU configuration in CAN-BUS gateway control unit. The procedure allows retrofitting ECUs or removing ECUs that are no longer necessary.
This video shows how to configure instrument cluster ECU to disable driver seatbelt warning.
